MCP6424T-E/ST
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 22mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 90kHz |
| Unity Gain BW-Nom | 90 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Supply Voltage Limit-Max | 6.5V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6424 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 4.4μA |
| Slew Rate | 0.05V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 1pA |
MCP6424T-E/ST Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 14 mark. I would like to remind you that this buffer op amp should be powered by an 3V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 14 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 1mV voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 4.4μA can be used to operate this linear amplifier. Voltage gain should remain at 115dB. On this instrumentation amplifier, there are 4 circuits that are connected together. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has.
MCP6424T-E/ST Features
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6424T-E/ST Applications
There are a lot of Microchip Technology MCP6424T-E/ST Instrumentational OP Amps applications.
- Logarithmic operation circuits
- High-frequency data acquisition systems
- pH (acidity)
- Inverse/same-phase proportional circuit
- Fast A/D and D/A converters
- Tablets
- Car stereo
- Video conversion and routing
- High gain DC amplifier
- ECG equipment
