MCP6442-E/SN

2 Channels 22mA per Channel 1pA 60 dB Instrumentational OP Amps 1.4V~6V MCP6442 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MCP6442-E/SN
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 516
Description: 2 Channels 22mA per Channel 1pA 60 dB Instrumentational OP Amps 1.4V~6V MCP6442 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2011
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn) - annealed
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MCP6442
Pin Count	8
Output Type	Rail-to-Rail
Power Supplies	1.5/5V
Number of Channels	2
Operating Supply Current	450nA
Nominal Supply Current	450nA
Output Current	22mA
Slew Rate	0.003V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	1.4V~6V
Output Current per Channel	22mA
Input Offset Voltage (Vos)	4.5mV
Bandwidth	9 kHz
Unity Gain BW-Nom	9000 kHz
Voltage Gain	110dB
Power Supply Rejection Ratio (PSRR)	65dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Low-Bias	YES
Micropower	YES
Height	1.25mm
Length	4.9mm
Width	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MCP6442-E/SN Overview

In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. A total of 8 terminations have been reported in the past few weeks. The pins on this board total to 8 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. There is an input offset voltage of 4.5mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using a supply current of 450nA , this buffer op amp will be able to operate. You should keep the voltage gain at 110dB for the time being. Instrumentation amplifier has 2 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer.