MCP6442T-E/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6442 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5V |
| Nominal Supply Current | 450nA |
| Output Current | 22mA |
| Current - Supply | 450nA |
| Slew Rate | 0.003V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.4V~6V |
| Input Offset Voltage (Vos) | 4.5mV |
| Gain Bandwidth Product | 9kHz |
| Unity Gain BW-Nom | 9000 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Low-Bias | YES |
| Micropower | YES |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6442T-E/MS Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 4.5mV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. It is recommended to keep the voltage gain at 110dB at all times. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The op amp is rated for an operating supply voltage of 2. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. As a result, it is recommended that a power supply of 450nA be used with this electronic part.
MCP6442T-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MCP6442T-E/MS Applications
There are a lot of Microchip Technology MCP6442T-E/MS Instrumentational OP Amps applications.
- Communication device
- Radiation thermometry transducers
- Addition operation circuits
- Exponential operation circuits
- Automatic control
- PDA
- Signal amplification
- Test and measurement instruments
- Broadcasting
- Medical instruments
