MCP6482-E/MS

2 Channels 12mA per Channel 1pA 65 dB Instrumentational OP Amps 2.2V~5.5V ±1.1V~2.75V MCP6482 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MCP6482-E/MS
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 429
Description: 2 Channels 12mA per Channel 1pA 65 dB Instrumentational OP Amps 2.2V~5.5V ±1.1V~2.75V MCP6482 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2013
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn) - annealed
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MCP6482
Output Type	Rail-to-Rail
Number of Channels	2
Number of Circuits	2
Nominal Supply Current	240μA
Slew Rate	2.7V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	65 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.2V~5.5V ±1.1V~2.75V
Output Current per Channel	12mA
Input Offset Voltage (Vos)	1.5mV
Bandwidth	4MHz
Unity Gain BW-Nom	4000 kHz
Voltage Gain	115dB
Power Supply Rejection Ratio (PSRR)	91dB
Supply Voltage Limit-Max	6.5V
Max Frequency	10kHz
Height	950μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

MCP6482-E/MS Overview

A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 1.5mV. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Maintain 115dB as the voltage gain. There are 2 circuits on this op amp. Instrumentation amplifier has 2 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer.