MCP651-E/SN
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP651 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 95mA |
| Current - Supply | 6mA |
| Slew Rate | 30V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 50MHz |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 123dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Current - Output / Channel | 100mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2009 |
| Series | mCal Technology |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
MCP651-E/SN Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 2.5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. Op amp ic rates 200μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The voltage gain should stay at 123dB. Buffer op amp is equipped with 1 channels on the device. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. It is recommended that this electronic component be used with an 6mA supply. In this case, mCal Technology represents the instrumentation amplifiers' series number.
MCP651-E/SN Features
8 Pins
supply voltage of 2.5V
123dB voltage gain
Output Type: Rail-to-Rail
MCP651-E/SN Applications
There are a lot of Microchip Technology MCP651-E/SN Instrumentational OP Amps applications.
- Industrial applications including automation
- Band-stop filter
- ECG equipment
- Weighing systems
- Portable media players
- Signal filtering
- Gaming industry
- single/dual op amp sum and difference circuits
- Radiation thermometry transducers
- Non-polarized electrodes
