MCP651T-E/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | mCal Technology |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP651 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 6mA |
| Output Current | 95mA |
| Current - Supply | 6mA |
| Slew Rate | 30V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 50MHz |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 123dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.5V |
| Current - Output / Channel | 100mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP651T-E/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 200μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is recommended to keep the voltage gain at 123dB at all times. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. As a whole, there are 1 elements that make up this buffer amplifier. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a recommendation, this electronic component should be used with a power supply that can deliver 6mA. mCal Technology corresponds to linear amplifier's series.
MCP651T-E/SN Features
8 Pins
supply voltage of 2.5V
123dB voltage gain
Output Type: Rail-to-Rail
MCP651T-E/SN Applications
There are a lot of Microchip Technology MCP651T-E/SN Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Differentiator circuits
- Logarithmic operation circuits
- Wireless base stations
- Large motor controllers
- earphone
- Commercial audio systems
- Voltage regulation circuit
- pH (acidity)
- Exponential operation circuits
