Parameters |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP652 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Number of Elements |
2 |
Power Supplies |
3/5V |
Nominal Supply Current |
6mA |
Output Current |
95mA |
Current - Supply |
6mA |
Slew Rate |
30V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
6pA |
Voltage - Supply, Single/Dual (±) |
2.5V~5.5V |
Input Offset Voltage (Vos) |
200μV |
Gain Bandwidth Product |
50MHz |
Unity Gain BW-Nom |
50000 kHz |
Voltage Gain |
123dB |
Average Bias Current-Max (IIB) |
0.005μA |
Power Supply Rejection Ratio (PSRR) |
61dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6.5V |
Current - Output / Channel |
100mA |
Low-Bias |
YES |
Micropower |
NO |
Programmable Power |
NO |
Wideband |
NO |
Height Seated (Max) |
1mm |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-VDFN Exposed Pad |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
mCal Technology |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
MCP652T-E/MF Overview
A 8-VDFN Exposed Pad case is used to package the op amp. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 200μV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. The voltage gain should stay at 123dB. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There is a rating of 2 for the operating supply voltage of the buffer op amp. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. For optimal performance, this electrical part should be connected to a supply with a current of 6mA. mCal Technology corresponds to linear amplifier's series.
MCP652T-E/MF Features
8 Pins
supply voltage of 2.5V
123dB voltage gain
Output Type: Rail-to-Rail
MCP652T-E/MF Applications
There are a lot of Microchip Technology MCP652T-E/MF Instrumentational OP Amps applications.
- Television broadcasting equipment
- Division circuits
- Navigation
- High gain DC amplifier
- Home audio systems
- Inverse/same-phase proportional circuit
- Proportional operation circuits
- earphone
- Car stereo
- Voltage regulation circuit