MCP653T-E/CHY
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | mCal Technology |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP653 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 95mA |
| Current - Supply | 6mA |
| Slew Rate | 30V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 50MHz |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 123dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Current - Output / Channel | 100mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP653T-E/CHY Overview
The linear amplifier is packaged in a SOT-23-6 case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be at least 6 terminations this year. In this case, there are 6 pins on the board. Please take in mind that this instrumentation amplifier should be run at 2.5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 6 pins. As far as the input offset voltage is concerned, linear amplifier rates at 200μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. 123dB should remain the voltage gain. There are a total of 1 channels available on the op amps. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. As a result, it is recommended that a power supply of 6mA be used with this electronic part. Buffer op amp series numbers are indicated by the mCal Technology.
MCP653T-E/CHY Features
6 Pins
supply voltage of 2.5V
123dB voltage gain
Output Type: Rail-to-Rail
MCP653T-E/CHY Applications
There are a lot of Microchip Technology MCP653T-E/CHY Instrumentational OP Amps applications.
- Professional videography
- Computer workstations
- Automotive sensors
- Band-pass filter
- Biopotential
- Displayers for aircraft and air transportation control systems
- MP3
- Video computer boards
- Strain gauges
- PDA
