Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Supplier Device Package |
8-SOIC |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2006 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Termination |
SMD/SMT |
Type |
General Purpose |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Base Part Number |
MCP6541 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.6V |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Response Time |
4 μs |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Input Offset Voltage (Vos) |
7mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
1μA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Propagation Delay (Max) |
8μs |
Height |
1.25mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6541-E/SN Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.The chip is packaged with Tube .A comparator of this type is typically of type General Purpose .A total of 1 elements can be found in it.Electronic comparator is recommended that you mount the device using type Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions by searching MCP6541 .The comparator presents a quiescent current of 1μA volts.The PCB or other board has a Surface Mount for mounting.Electronic comparator is possible to input up to 1pA current into the device.Comparator electronics is not recommended to operate at a temperature higher than 125°C .Comparator electronics will not be able to function at temperatures below -40°C .The maximal supply voltage of the comparator is 5.5V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 1.6V .To maintain output quality, 1 channels cooperate.Comparator electronics is necessary to have a voltage of 5V for normal operation.
MCP6541-E/SN Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6541-E/SN Applications
There are a lot of Microchip Technology MCP6541-E/SN linear comparators applications.
- General-Purpose Portable Devices
- Hand-Held Electronics
- Security Detection Systems
- Battery-Powered Electronics
- Infotainment and Clusters
- Zero-Crossing Detectors
- Analog front end
- Automatic Test Equipment
- General Purpose Low Voltage Applications
- Window Comparators