MCP6541-I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6541 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 1mA |
| Output Current | 2mA |
| Max Supply Current | 1mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 163 °C/W |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6541-I/SN Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Push-Pull, Rail-to-Rail, TTL output.The part will be shipped by Tube .The comparator has 8 terminals.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .The device is equipped with 8 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.There are 8 pins on the comparator.You can search MCP6541 if you are looking for more pin-to-pin solutions.There is 1μA current flowing in this comparator.The PCB or other board has a Surface Mount for mounting.Normal use of the device should require a nominal supply current of 1mA .If the current supply exceeds 1mA , the comparator could malfunction.There is a maximum current that can be input into the device of 1pA .Normal operation requires 5V operating supply voltage.
MCP6541-I/SN Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6541-I/SN Applications
There are a lot of Microchip Technology MCP6541-I/SN linear comparators applications.
- Portable and Battery-Powered Systems
- Infotainment and Clusters
- Security Detection Systems
- Mobile Phones
- Portable Battery Monitoring
- Power management
- Analog front end
- Automotive
- Zero-Crossing Detectors
- Mobile Phones and Tablets
