MCP6541RT-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6541 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 256 °C/W |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6541RT-E/OT Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.The part is shipped by Tape & Reel (TR) .There are5 terminals on the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 1 elements.The device contains 5 pins.The type of mounting recommended is Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.There are 5 pins on the comparator.You may wish to search MCP6541 for more solutions that address your specific needs.The comparator presents a quiescent current of 1μA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is possible to input a maximum of 1pA current into the device.
MCP6541RT-E/OT Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6541RT-E/OT Applications
There are a lot of Microchip Technology MCP6541RT-E/OT linear comparators applications.
- High-Speed Sampling Circuits
- Motor drives
- General-Purpose, Low-Voltage Applications
- General Purpose Low Voltage Applications
- Window Comparators, Multivibrators
- Zero-Crossing Detectors
- System control and monitoring
- Portable Battery Monitoring
- Mobile Phones and Tablets
- Appliances
