MCP6541T-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6541 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4 μs |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 256 °C/W |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6541T-E/OT Overview
To facilitate transportation, it comes packaged in SC-74A, SOT-753 .The comparator has a type CMOS, Push-Pull, Rail-to-Rail, TTL output.The part will be shipped by Tape & Reel (TR) .There are 5 terminals on the comparator.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.The board includes 5 pins.The recommended mounting method is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.5 pins are present on the comparator.You can find more pin-to-pin solutions by searching MCP6541 .A quiescent current of 1μA is displayed by this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is possible to input a maximum of 1pA current into the device.Normal operation requires 5V operating supply voltage.
MCP6541T-E/OT Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6541T-E/OT Applications
There are a lot of Microchip Technology MCP6541T-E/OT linear comparators applications.
- Wireless Base Stations
- Motor drives
- High-Speed Sampling Circuits
- Consumer Medical Electronics
- High-Speed Differential Line Receiver
- Hand-Held Electronics
- Mobile Phones and Tablets
- System control and monitoring
- RC Timers
- Security Detection Systems
