MCP6541UT-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6541 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 600nA |
| Max Supply Current | 600nA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 256 °C/W |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6541UT-E/OT Overview
The product is packaged in SC-74A, SOT-753 in order to facilitate transportation.This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.This package has been designed with Cut Tape (CT) .There are 5 terminals on the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.A total of 1 elements can be found in it.The board includes 5 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.This comparator has 5 pins.If you require more pin-to-pin solutions, search MCP6541 for more options.In this comparator, the quiescent current is 1μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.For normal use of the device, the nominal supply current should be 600nA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 600nA .You are allowed to input a maximum current of 1pA into the device.
MCP6541UT-E/OT Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6541UT-E/OT Applications
There are a lot of Microchip Technology MCP6541UT-E/OT linear comparators applications.
- Laptop Computers
- Window Comparators
- General Purpose Low Voltage Applications
- DC/DC and AC/DC power supplies
- RC Timers
- Portable Battery Monitoring
- Current and voltage sensing
- Threshold Detectors
- Power management
- Wearable Devices
