Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT APPLICABLE |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT APPLICABLE |
Base Part Number |
MCP6542 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
2 |
Power Supplies |
1.6/5.5V |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Supply Current-Max |
0.001mA |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Input Offset Voltage (Vos) |
7mV |
Average Bias Current-Max (IIB) |
0.005μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
1μA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Height |
4.953mm |
Length |
10.16mm |
Width |
7.112mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6542-E/P Overview
A convenient transport package is provided in 8-DIP (0.300, 7.62mm) .A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.We ship the part through Tube .The comparator has a total of 8 terminals.The chip belongs to Comparator .Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.The type of the chip can be classified as General Purpose .In total, it contains 2 elements.The device contains 8 pins.The recommended mounting method is Through Hole .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.There are 8 pins on the comparator.Alternatively, you may search for MCP6542 to find more pin-to-pin solutions for your specific needs.As a result, this comparator displays a quiescent current of 1μA .There is a Through Hole for mounting it on a PCB or other board.There is sufficient power to run the device from 1.6/5.5V power supplies.You are allowed to input a maximum current of 1pA into the device.With this part, a minimum current of 0.001mA can be supplied.
MCP6542-E/P Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6542-E/P Applications
There are a lot of Microchip Technology MCP6542-E/P linear comparators applications.
- High-Speed Differential Line Receiver
- Appliances
- DC/DC and AC/DC power supplies
- Consumer Medical Electronics
- Industrial
- Handheld Instruments
- Mobile Phones and Tablets
- Automotive
- General-Purpose Portable Devices
- System control and monitoring