MCP6542-I/P
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MCP6542 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 1.6/5.5V |
| Nominal Supply Current | 1mA |
| Output Current | 2mA |
| Max Supply Current | 1mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 5.33mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
MCP6542-I/P Overview
To facilitate transportation, it comes packaged in 8-DIP (0.300, 7.62mm) .Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.This package has been designed with Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparator families.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.When it comes to types, this comparator is a typical General Purpose .Electronic comparator has a total of 2 elements.The device is equipped with 8 pins.The recommended mounting type is Through Hole .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are present on the comparator.You can search MCP6542 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 1μA .The PCB or other board can be mounted using the Through Hole on it.Normal operation of the device requires 1mA supply current.A current supply greater than 1mA may cause the comparator to malfunction.This device requires 1.6/5.5V power supplies to operate.
MCP6542-I/P Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6542-I/P Applications
There are a lot of Microchip Technology MCP6542-I/P linear comparators applications.
- Hand-Held Electronics
- Automotive
- Current and voltage sensing
- High-Speed Sampling Circuits
- Zero-Crossing Detectors
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
- Handheld Instruments
- Body Control Modules
- Infotainment & cluster
