Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP6542 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
2 |
Power Supplies |
1.6/5.5V |
Nominal Supply Current |
1mA |
Output Current |
2mA |
Max Supply Current |
1mA |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Output Current per Channel |
2mA |
Input Offset Voltage (Vos) |
7mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
1μA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Natural Thermal Resistance |
163 °C/W |
Height |
1.25mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6542-I/SN Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.This package has been designed with Tube .The device is designed with 8 terminations.The electrical component here belongs to the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Speaking of types, this is a typical General Purpose comparator.This is a 2 element comparator.The device is equipped with 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search MCP6542 for more options.There is a quiescent current of 1μA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.For normal use of the device, the nominal supply current should be 1mA .A current supply greater than 1mA may result in the comparator malfunctioning.A power supply of 1.6/5.5V is sufficient for the operation of the device.Electronic comparator is possible to input a maximum of 1pA current into the device.
MCP6542-I/SN Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6542-I/SN Applications
There are a lot of Microchip Technology MCP6542-I/SN linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Automotive
- Self-diagnostics
- Metering Systems
- Limit Comparators
- Point of load regulators
- Infotainment and Clusters
- Threshold Detectors
- Window Comparators, Multivibrators
- General-Purpose, Low-Voltage Applications