Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP6542 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
2 |
Power Supplies |
1.6/5.5V |
Nominal Supply Current |
1mA |
Output Current |
2mA |
Max Supply Current |
1mA |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Output Current per Channel |
2mA |
Input Offset Voltage (Vos) |
7mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
1μA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6542T-I/MS Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation.There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.The chip is packaged with Tape & Reel (TR) .As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .Currently, it consists of only 2 elements.The board includes 8 pins.In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.8 pins are present on the comparator.Try search MCP6542 to get more pin-to-pin solutions for your special needs.There is 1μA current flowing in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .A current supply greater than 1mA may result in the comparator malfunctioning.In order to operate the device, 1.6/5.5V power supplies are sufficient.
MCP6542T-I/MS Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6542T-I/MS Applications
There are a lot of Microchip Technology MCP6542T-I/MS linear comparators applications.
- Power Supervision
- Mobile Communications
- Automotive
- DC/DC and AC/DC power supplies
- Current and voltage sensing
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Phones and Tablets
- Security Detection Systems
- Appliances
- General-Purpose, Low-Voltage Applications