MCP6542T-I/SN
| Parameters | |
|---|---|
| Turn On Delay Time | 4 μs |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 163 °C/W |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6542 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 1.6/5.5V |
| Nominal Supply Current | 1μA |
| Output Current | 2mA |
| Max Supply Current | 1mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
MCP6542T-I/SN Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.The part will be shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.It's a typical General Purpose comparator.In total, it contains 2 elements.Electronic comparator has 8 pins.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.Electronic comparator has 8 pins.You can search MCP6542 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 1μA volts.The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 1μA for normal use.A supply current exceeding 1mA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh 1.6/5.5V power supplies.You are allowed to input a maximum current of 1pA into the device.
MCP6542T-I/SN Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6542T-I/SN Applications
There are a lot of Microchip Technology MCP6542T-I/SN linear comparators applications.
- High-Speed Sampling Circuits
- RC Timers
- Mobile Phones and Tablets
- Simple Analog-to-Digital Converters (ADCs)
- Metering Systems
- Portable and Battery-Powered Systems
- Notebooks and PDAs
- Battery management and protection
- Pulse, Squarewave, and Time Delay Generators
- Factory automation & control
