Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Base Part Number |
MCP6543 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
1 |
Nominal Supply Current |
600nA |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Input Offset Voltage (Vos) |
7mV |
Average Bias Current-Max (IIB) |
0.005μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
1μA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Height |
4.953mm |
Length |
10.16mm |
Width |
7.112mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6543-E/P Overview
A convenient packaging is provided in the form of 8-DIP (0.300, 7.62mm) .This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.The part will be shipped by Tube .There are8 terminals on the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .Currently, it consists of only 1 elements.Electronic comparator has 8 pins.The recommended mounting method is Through Hole .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MCP6543 .There is a quiescent current of 1μA in this comparator.A Through Hole is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 600nA .
MCP6543-E/P Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6543-E/P Applications
There are a lot of Microchip Technology MCP6543-E/P linear comparators applications.
- Industrial
- Zero-Crossing Detectors
- Metering Systems
- General-Purpose, Low-Voltage Applications
- High-Speed Sampling Circuits
- Battery-Powered Electronics
- Current and voltage sensing
- Power management
- DC/DC and AC/DC power supplies
- High-Speed Differential Line Receiver