MCP6543-I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6543 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 1mA |
| Output Current | 2mA |
| Max Supply Current | 1mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6543-I/MS Overview
Electronic comparator is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for convenient transportation.The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.As a result, it is designed with Tube package.There are8 terminals on the comparator.Other Comparator like the device play a important role in the industry.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 1 elements in total.There are 8 pins on this board.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .This comparator has 8 pins.Search MCP6543 to find more pin-to-pin solutions.This comparator presents a quiescent current of 1μA .Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .An excess of current supply over 1mA could result in malfunction of the comparator.A maximum current of 1pA can be supplied to the device.For normal operation, there should be 5V operating supply voltage applied.
MCP6543-I/MS Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6543-I/MS Applications
There are a lot of Microchip Technology MCP6543-I/MS linear comparators applications.
- Portable Battery Monitoring
- High-Speed Sampling Circuits
- Wide Range VCO; MOS Clock Timers
- Appliances
- Security Detection Systems
- Metering Systems
- Motor drives
- Battery-Powered Electronics
- Consumer Medical Electronics
- Automatic Test Equipment
