MCP6543T-E/SN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6543 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
MCP6543T-E/SN Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail, TTL .Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.A comparator of this type is typically of type General Purpose .Electronic comparator consists of 1 elements in total.A total of 8 pins are included.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.This comparator has 8 pins.You can find more pin-to-pin solutions by searching MCP6543 .There is a quiescent current of 1μA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is possible to input a maximum of 1pA current into the device.
MCP6543T-E/SN Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6543T-E/SN Applications
There are a lot of Microchip Technology MCP6543T-E/SN linear comparators applications.
- Analog front end
- Window Comparators, Multivibrators
- Zero-Crossing Detectors
- Infotainment & cluster
- Consumer Medical Electronics
- Wearable Devices
- Factory automation & control
- General-Purpose Portable Devices
- Mobile Phones and Tablets
- Wide Range VCO; MOS Clock Timers
