MCP6543T-I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6543 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1mA |
| Output Current | 2mA |
| Max Supply Current | 1mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6543T-I/MS Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) for ease of transportation.Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail, TTL .As a result, it is designed with Tape & Reel (TR) package.As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a General Purpose chip.The total number of elements is 1 .The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has a pin count of 8 .In order to find a solution that meets your specific needs, search MCP6543 for more pin-to-pin solutions.A quiescent current of 1μA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 1mA .A supply current exceeding 1mA may result in the comparator malfunctioning.Input current to the device is limited to 1pA .
MCP6543T-I/MS Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6543T-I/MS Applications
There are a lot of Microchip Technology MCP6543T-I/MS linear comparators applications.
- Alarm and Monitoring Circuits
- Mobile Communications
- General-Purpose, Low-Voltage Applications
- Analog front end
- Factory automation & control
- Industrial
- Power Supervision
- Automotive
- High-Speed Sampling Circuits
- Body Control Modules
