MCP6544-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6544 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 1.6/5.5V |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4 μs |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 100 °C/W |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6544-E/ST Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.The part is shipped by Tube .You can find 14 terminals of the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .In total, it contains 4 elements.The device includes 14 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.The comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search MCP6544 .A quiescent current of 1μA is observed in this comparator.The PCB or other board can be mounted using the Surface Mount on it.The nominal supply current of the device should be 1μA for normal use.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 1μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 1.6/5.5V power supplies.
MCP6544-E/ST Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6544-E/ST Applications
There are a lot of Microchip Technology MCP6544-E/ST linear comparators applications.
- Alarm and Monitoring Circuits
- Zero-Crossing Detectors
- Industrial
- Battery management and protection
- Limit Comparators
- Wearable Devices
- Notebooks and PDAs
- Mobile Phones and Tablets
- Wide Range VCO; MOS Clock Timers
- Zero-Crossing Detectors
