Parameters |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Current - Quiescent (Max) |
1μA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Height |
1.25mm |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP6544 |
Pin Count |
14 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Operating Supply Voltage |
5V |
Number of Elements |
4 |
Nominal Supply Current |
1mA |
Output Current |
2mA |
Max Supply Current |
1mA |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Response Time |
4000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Output Current per Channel |
2mA |
Input Offset Voltage (Vos) |
7mV |
MCP6544-I/SL Overview
A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.The part will be shipped by Tube .The device is designed with 14 terminations.The electrical component in this case belongs to the Comparator families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The type of the chip can be classified as General Purpose .In total, it contains 4 elements.The device includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.This comparator has 14 pins.Alternatively, you may search for MCP6544 to find more pin-to-pin solutions for your specific needs.A quiescent current of 1μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .An excess of current supply over 1mA could result in malfunction of the comparator.Electronic comparator is possible to input up to 1pA current into the device.In order to operate normally, a supply voltage of 0 is required.
MCP6544-I/SL Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6544-I/SL Applications
There are a lot of Microchip Technology MCP6544-I/SL linear comparators applications.
- Power management
- Point of load regulators
- General Purpose Low Voltage Applications
- Portable and Battery-Powered Systems
- Self-diagnostics
- Hand-Held Electronics
- Battery-Powered Electronics
- Lithium ion battery monitoring
- General-Purpose Portable Devices
- Metering Systems