MCP6544T-E/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6544 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 1.6/5.5V |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Supply Current-Max | 0.001mA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6544T-E/SL Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.It's a typical General Purpose comparator.In total, it contains 4 elements.The board includes 14 pins.Surface Mount universial mout for easy adapting.In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .14 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MCP6544 .There is a quiescent current of 1μA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.There is sufficient power to run the device from 1.6/5.5V power supplies.You can input a maximum current of 1pA into this device.Comparator electronics is possible to supply this part wComparator electronicsh a minimum current of 0.001mA .
MCP6544T-E/SL Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6544T-E/SL Applications
There are a lot of Microchip Technology MCP6544T-E/SL linear comparators applications.
- Self-diagnostics
- Notebooks and PDAs
- Analog front end
- General-Purpose Portable Devices
- Mobile Phones and Tablets
- RC Timers
- Metering Systems
- Power Supervision
- Automotive
- General-Purpose, Low-Voltage Applications
