MCP6544T-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6544 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 1.6/5.5V |
| Nominal Supply Current | 1mA |
| Output Current | 2mA |
| Max Supply Current | 1mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 4000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6544T-I/ST Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) for ease of transportation.The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail, TTL .Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to find the 14 terminals of the comparator.The chip belongs to Comparator .With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .There are a total of 4 elements in it.The device includes 14 pins.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 14 pins on the comparator.If you require more pin-to-pin solutions, search MCP6544 for more options.There is a quiescent current of 1μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 1mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1mA .The device can be operated with 1.6/5.5V power supplies.
MCP6544T-I/ST Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6544T-I/ST Applications
There are a lot of Microchip Technology MCP6544T-I/ST linear comparators applications.
- Analog front end
- Automotive
- Notebooks and PDAs
- Automatic Test Equipment
- Window Comparators
- System control and monitoring
- Zero-Crossing Detectors
- Simple Analog-to-Digital Converters (ADCs)
- General-Purpose, Low-Voltage Applications
- General Purpose Low Voltage Applications
