MCP6546-I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6546 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MCP6546-I/MS Overview
A convenient transport package is provided in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .This comparator is of the CMOS, Open-Drain, Rail-to-Rail, TTL output type.As a result, it is designed with Tube package.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator can be classified as a General Purpose chip.The device includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching MCP6546 .A quiescent current of 1μA is observed in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 1μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1μA .For normal operation, there should be 5V operating supply voltage applied.
MCP6546-I/MS Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6546-I/MS Applications
There are a lot of Microchip Technology MCP6546-I/MS linear comparators applications.
- Threshold Detectors
- Mobile Communications
- Mobile Phones and Tablets
- General-Purpose, Low-Voltage Applications
- Notebooks and PDAs
- Handheld Instruments
- Automotive
- Point of load regulators
- Pulse, Squarewave, and Time Delay Generators
- Limit Comparators
