MCP6546-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MCP6546 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 5.33mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
MCP6546-I/P Overview
The product is packaged in 8-DIP (0.300, 7.62mm) for ease of transportation.A comparator with an output type of CMOS, Open-Drain, Rail-to-Rail, TTL is being used.This chip is designed with the Tube package.The device is designed with 8 terminations.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as General Purpose .A total of 1 elements can be found in it.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount the device using type Through Hole .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 8 pins on the comparator.You may wish to search MCP6546 for more solutions that address your specific needs.As a result, this comparator displays a quiescent current of 1μA .A Through Hole is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 1μA .A current supply greater than 1μA may result in the comparator malfunctioning.Input current to the device cannot exceed 1pA .
MCP6546-I/P Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6546-I/P Applications
There are a lot of Microchip Technology MCP6546-I/P linear comparators applications.
- Portable Battery Monitoring
- Infotainment and Clusters
- Laptop Computers
- DC/DC and AC/DC power supplies
- Zero-Crossing Detectors
- General Purpose Low Voltage Applications
- General-Purpose Portable Devices
- Battery-Powered Electronics
- Mobile Phones
- Self-diagnostics
