MCP6546RT-I/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Base Part Number | MCP6546 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 256 °C/W |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6546RT-I/OT Overview
Electronic comparator is packaged in SC-74A, SOT-753 for convenient transportation.This comparator is of the CMOS, Open-Drain, Rail-to-Rail, TTL output type.This chip is designed with the Tape & Reel (TR) package.The electrical component in this case belongs to the Comparator family.The type of the chip can be classified as General Purpose .Electronic comparator has a total of 1 elements.The board includes 5 pins.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 5 pins on the comparator.You may wish to search MCP6546 for more solutions that address your specific needs.The comparator presents a quiescent current of 1μA volts.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 1μA .Current supply exceeding 1μA could cause disfunction of the compartator.
MCP6546RT-I/OT Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6546RT-I/OT Applications
There are a lot of Microchip Technology MCP6546RT-I/OT linear comparators applications.
- DC/DC and AC/DC power supplies
- Self-diagnostics
- Consumer Medical Electronics
- Wearable Devices
- Battery-Powered Electronics
- High-Speed Sampling Circuits
- Analog front end
- Wide Range VCO; MOS Clock Timers
- Ultra-Low Power Systems
- Pulse, Squarewave, and Time Delay Generators
