MCP6546T-I/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6546 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 256 °C/W |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6546T-I/OT Overview
For convenience, it is packaged in SC-74A, SOT-753 .The comparator has an output type of CMOS, Open-Drain, Rail-to-Rail, TTL .Electronic comparator is shipped by Tape & Reel (TR) .You can find 5 terminals of the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 1 elements.The pinout of the component starts from 5 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .Electronic comparator has 5 pins.In case you are looking for more pin-to-pin solutions, you may want to search MCP6546 .A quiescent current of 1μA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 1μA supply current.A current supply greater than 1μA may result in the comparator malfunctioning.You can input a maximum current of 1pA into this device.
MCP6546T-I/OT Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6546T-I/OT Applications
There are a lot of Microchip Technology MCP6546T-I/OT linear comparators applications.
- Battery-Powered Electronics
- System control and monitoring
- Automatic Test Equipment
- Appliances
- Power management
- Wireless Base Stations
- Zero-Crossing Detectors
- Power Supervision
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
