MCP6546UT-E/OT
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6546 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4 μs |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
MCP6546UT-E/OT Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.Output type CMOS, Open-Drain, Rail-to-Rail, TTL is used for this comparator.The part is shipped by Tape & Reel (TR) .The comparator has 5 terminals.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.This is a typical comparator of type General Purpose .This is a 1 element comparator.The pinout of the component starts from 5 pins it has.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.The comparator consists of 5 pins.Alternatively, you may search for MCP6546 to find more pin-to-pin solutions for your specific needs.This comparator presents a quiescent current of 1μA .The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 1μA .If the current supply exceeds 1μA , the comparator might be damaged.The maximal current your can input into the device is 1pA .
MCP6546UT-E/OT Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6546UT-E/OT Applications
There are a lot of Microchip Technology MCP6546UT-E/OT linear comparators applications.
- Window Comparators, Multivibrators
- Zero-Crossing Detectors
- General-Purpose Portable Devices
- Lithium ion battery monitoring
- Laptop Computers
- Appliances
- Set Top Boxes
- Window Comparators
- Factory automation & control
- Mobile Communications
