MCP6546UT-I/LT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6546 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4 μs |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 1mm |
| Length | 2.25mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6546UT-I/LT Overview
In order to facilitate transportation, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .The comparator has a CMOS, Open-Drain, Rail-to-Rail, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .The device is designed with 5 terminations.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.Speaking of types, this is a typical General Purpose comparator.There are a total of 1 elements in it.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.5 pins are available on the comparator.In order to find a solution that meets your specific needs, search MCP6546 for more pin-to-pin solutions.There is a quiescent current of 1μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 1μA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1μA .Electronic comparator is possible to input a maximum current of 1pA into the device.
MCP6546UT-I/LT Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6546UT-I/LT Applications
There are a lot of Microchip Technology MCP6546UT-I/LT linear comparators applications.
- Laptop Computers
- Power management
- High-Speed Differential Line Receiver
- Battery-Powered Electronics
- Infotainment and Clusters
- Wide Range VCO; MOS Clock Timers
- Security Detection Systems
- Power Supervision
- Pulse, Squarewave, and Time Delay Generators
- DC/DC and AC/DC power supplies
