MCP6547-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MCP6547 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 1.6/5.5V |
| Output Current | 30mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Supply Current-Max | 0.001mA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6547-E/P Overview
Electronic comparator is packaged in 8-DIP (0.300, 7.62mm) for convenient transportation.A comparator with an output type of CMOS, Open-Drain, Rail-to-Rail, TTL is being used.The part will be shipped by Tube .There are 8 terminals on the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .There are a total of 2 elements in it.There are 8 pins on this board.Electronic comparator is recommended to mount the device using type Through Hole .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .The comparator has a pin count of 8 .In case you are looking for more pin-to-pin solutions, you may want to search MCP6547 .In this comparator, the quiescent current is 1μA .The PCB or other board can be mounted using the Through Hole on it.1.6/5.5V power supplies are enough to run the device.This part can be supplied with a maimum current of 0.001mA .
MCP6547-E/P Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6547-E/P Applications
There are a lot of Microchip Technology MCP6547-E/P linear comparators applications.
- Factory automation & control
- Consumer Medical Electronics
- Self-diagnostics
- Zero-Crossing Detectors
- Wearable Devices
- High-Speed Sampling Circuits
- Automotive
- Industrial
- Wireless Base Stations
- RC Timers
