MCP6547-I/MS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6547 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 206 °C/W |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6547-I/MS Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.The comparator has a CMOS, Open-Drain, Rail-to-Rail, TTL output.Ready for shipping in Tube package.The comparator has 8 terminals.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .This element consists of 2 elements in total.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .Electronic comparator has 8 pins.You can find more pin-to-pin solutions by searching MCP6547 .There is a quiescent current of 1μA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .For normal use of the device, the nominal supply current should be 1μA .If the current supply exceeds 1μA , the comparator could malfunction.Input current to the device cannot exceed 1pA .Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
MCP6547-I/MS Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6547-I/MS Applications
There are a lot of Microchip Technology MCP6547-I/MS linear comparators applications.
- Handheld Instruments
- Set Top Boxes
- Automatic Test Equipment
- Battery-Powered Electronics
- Motor drives
- RC Timers
- Lithium ion battery monitoring
- Infotainment & cluster
- Multivibrators and High-Voltage Digital Logic Gates
- Power Supervision
