Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
MCP6547 |
Pin Count |
8 |
Output Type |
CMOS, Open-Drain, Rail-to-Rail, TTL |
Number of Elements |
2 |
Power Supplies |
1.6/5.5V |
Nominal Supply Current |
1μA |
Output Current |
30mA |
Max Supply Current |
1μA |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Response Time |
3000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Output Current per Channel |
2mA |
Input Offset Voltage (Vos) |
7mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Input Bias Current |
1pA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Height |
5.33mm |
Length |
10.16mm |
Width |
7.11mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6547-I/P Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .A comparator with a CMOS, Open-Drain, Rail-to-Rail, TTL output is used here.This package has been designed with Tube .As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator families.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .This element consists of 2 elements in total.The device includes 8 pins.The recommended mounting type is Through Hole .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator is equipped with 8 pins.You can find more pin-to-pin solutions for your special requirements by searching MCP6547 .There is 1μA current flowing in this comparator.Mounting on PCBs or other boards is easy with the Through Hole .Normal operation of the device requires a nominal supply current of 1μA .The compartator could be damaged if the current supply exceeds 1μA .The device can be operated with 1.6/5.5V power supplies.
MCP6547-I/P Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6547-I/P Applications
There are a lot of Microchip Technology MCP6547-I/P linear comparators applications.
- Handheld Instruments
- Ultra-Low Power Systems
- Wireless Base Stations
- Pulse, Squarewave, and Time Delay Generators
- Automatic Test Equipment
- Threshold Detectors
- Current and voltage sensing
- Battery-Powered Electronics
- Power management
- System control and monitoring