banner_page

MCP6547-I/SN

Surface Mount Tube 30mA mA 4 μs μs Linear Comparators 1pA pA 2003 1μA μA 7mV mV Surface Mount


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MCP6547-I/SN
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 367
  • Description: Surface Mount Tube 30mA mA 4 μs μs Linear Comparators 1pA pA 2003 1μA μA 7mV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Supplier Device Package 8-SOIC
Operating Temperature -40°C~85°C
Packaging Tube
Published 2003
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MCP6547
Output Type CMOS, Open-Drain, Rail-to-Rail, TTL
Number of Elements 2
Number of Channels 2
Max Supply Voltage 5.5V
Min Supply Voltage 1.6V
Nominal Supply Current 1μA
Output Current 30mA
Max Supply Current 1μA
Propagation Delay 8 μs
Quiescent Current 1μA
Response Time 4 μs
Common Mode Rejection Ratio 70 dB
Voltage - Supply, Single/Dual (±) 1.6V~5.5V
Output Current per Channel 2mA
Input Offset Voltage (Vos) 7mV
Power Supply Rejection Ratio (PSRR) 80dB
Input Bias Current 1pA
Current - Quiescent (Max) 1μA
Voltage - Input Offset (Max) 7mV @ 5.5V
Current - Input Bias (Max) 1pA @ 5.5V
Hysteresis 6.5mV
CMRR, PSRR (Typ) 70dB CMRR, 80dB PSRR
Natural Thermal Resistance 163 °C/W
Current - Output (Typ) 30mA
Propagation Delay (Max) 8μs
Height 1.25mm
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP6547-I/SN Overview


To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Open-Drain, Rail-to-Rail, TTL output.Electronic comparator is shipped by Tube .It's a typical General Purpose comparator.Electronic comparator has a total of 2 elements.The type of mounting recommended is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.You can find more pin-to-pin solutions by searching MCP6547 .The comparator displays a quiescent current of 1μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires a nominal supply current of 1μA .A current supply greater than 1μA may result in the comparator malfunctioning.Temperatures above 85°C are not recommended.A temperature lower than -40°C is unsuitable for the device.Comparator electronics is specified that the comparator's maximum supply voltage is 5.5V .A voltage of 1.6V is the minimum supply voltage allowed by this comparator.To maintain the output quality, 2 channels work together.

MCP6547-I/SN Features


CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA

MCP6547-I/SN Applications


There are a lot of Microchip Technology MCP6547-I/SN linear comparators applications.

  • Zero-Crossing Detectors
  • Battery management and protection
  • Portable and Battery-Powered Systems
  • Mobile Phones
  • Factory automation & control
  • Pulse, Squarewave, and Time Delay Generators
  • Zero-Crossing Detectors
  • High-Speed Differential Line Receiver
  • Building automation
  • Mobile Communications

Write a review

Note: HTML is not translated!
    Bad           Good