Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP6547 |
Pin Count |
8 |
Output Type |
CMOS, Open-Drain, Rail-to-Rail, TTL |
Number of Elements |
2 |
Power Supplies |
1.6/5.5V |
Nominal Supply Current |
1μA |
Output Current |
30mA |
Max Supply Current |
1μA |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Response Time |
3000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Output Current per Channel |
2mA |
Input Offset Voltage (Vos) |
7mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Natural Thermal Resistance |
206 °C/W |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6547T-I/MS Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) to facilitate transportation.There is a comparator of type CMOS, Open-Drain, Rail-to-Rail, TTL output on this device.Ready for shipping in Tape & Reel (TR) package.The comparator has 8 terminals.Other Comparator like the device play a important role in the industry.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.It's a typical General Purpose comparator.The total number of elements is 2 .Electronic comparator has 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.This comparator has 8 pins.Alternatively, you may search for MCP6547 to find more pin-to-pin solutions for your specific needs.A quiescent current of 1μA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.The nominal supply current of the device should be 1μA for normal use.Current supply exceeding 1μA could cause disfunction of the compartator.Electronic comparator is sufficient to run the device wElectronic comparatorh 1.6/5.5V power supplies.Electronic comparator is possible to input a maximum current of 1pA into the device.
MCP6547T-I/MS Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6547T-I/MS Applications
There are a lot of Microchip Technology MCP6547T-I/MS linear comparators applications.
- Body Control Modules
- Lithium ion battery monitoring
- Mobile Communications
- General Purpose Low Voltage Applications
- Security Detection Systems
- Notebooks and PDAs
- Alarm and Monitoring Circuits
- Infotainment & cluster
- Set Top Boxes
- General-Purpose Portable Devices