MCP6547T-I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6547 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Power Supplies | 1.6/5.5V |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6547T-I/SN Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Open-Drain, Rail-to-Rail, TTL output.We ship the part through Tape & Reel (TR) .The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.It's a typical General Purpose comparator.Currently, it consists of only 2 elements.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MCP6547 .The comparator displays a quiescent current of 1μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current for the device be set to 1μA .A current supply greater than 1μA may cause the comparator to malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 1.6/5.5V power supplies.You can input a maximum current of 1pA into this device.
MCP6547T-I/SN Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6547T-I/SN Applications
There are a lot of Microchip Technology MCP6547T-I/SN linear comparators applications.
- System control and monitoring
- Battery-Powered Electronics
- Notebooks and PDAs
- Window Comparators, Multivibrators
- Laptop Computers
- Metering Systems
- Pulse, Squarewave, and Time Delay Generators
- Ultra-Low Power Systems
- Automatic Test Equipment
- Wireless Base Stations
