MCP6548-E/P
| Parameters | |
|---|---|
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MCP6548 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 600nA |
| Output Current | 30mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
MCP6548-E/P Overview
In order to facilitate transportation, it is packaged in 8-DIP (0.300, 7.62mm) .A comparator with an output type of CMOS, Open-Drain, Rail-to-Rail, TTL is being used.The part is shipped by Tube .As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .Electronic comparator has a total of 1 elements.The device includes 8 pins.Electronic comparator is recommended that you mount the device using type Through Hole .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator is equipped with 8 pins.You can find more pin-to-pin solutions by searching MCP6548 .The comparator presents a quiescent current of 1μA volts.This component has a Through Hole mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 600nA .You are allowed to input a maximum current of 1pA into the device.
MCP6548-E/P Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6548-E/P Applications
There are a lot of Microchip Technology MCP6548-E/P linear comparators applications.
- Zero-Crossing Detectors
- Current and voltage sensing
- Pulse, Squarewave, and Time Delay Generators
- Wide Range VCO; MOS Clock Timers
- Mobile Communications
- Building automation
- Metering Systems
- Limit Comparators
- High-Speed Differential Line Receiver
- Motor drives
