MCP6548T-I/SN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6548 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6548T-I/SN Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, Open-Drain, Rail-to-Rail, TTL .The part is shipped by Tape & Reel (TR) .There are8 terminals on the comparator.Electronic comparator is a part of Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as General Purpose .Currently, it consists of only 1 elements.Electronic comparator includes 8 pins.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching MCP6548 .A quiescent current of 1μA is displayed by this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current of the device be 1μA .If the current supply exceeds 1μA , the comparator could malfunction.You are allowed to input a maximum current of 1pA into the device.
MCP6548T-I/SN Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6548T-I/SN Applications
There are a lot of Microchip Technology MCP6548T-I/SN linear comparators applications.
- Mobile Phones and Tablets
- Portable Battery Monitoring
- Window Comparators, Multivibrators
- Infotainment and Clusters
- Current and voltage sensing
- Security Detection Systems
- Notebooks and PDAs
- Window Comparators
- Wearable Devices
- Lithium ion battery monitoring
