MCP6549-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | MCP6549 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 1.6/5.5V |
| Output Current | 30mA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Supply Current-Max | 0.001mA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 1μA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6549-E/P Overview
For convenience, it is packaged in 14-DIP (0.300, 7.62mm) .Output type of this comparator is CMOS, Open-Drain, Rail-to-Rail, TTL .This chip is designed with the Tube package.14 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.Speaking of types, this is a typical General Purpose comparator.Currently, it consists of only 4 elements.The device contains 8 pins.Electronic comparator is recommended that the mounting type be Through Hole .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .There are 14 pins on the comparator.In order to find a solution that meets your specific needs, search MCP6549 for more pin-to-pin solutions.The comparator displays a quiescent current of 1μA .Electronic comparator has a Through Hole for mounting on PCB or other boards.There is sufficient power to run the device from 1.6/5.5V power supplies.There is a maximum current that can be input into the device of 1pA .With a minimum current of 0.001mA , this part can be supplied.
MCP6549-E/P Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
MCP6549-E/P Applications
There are a lot of Microchip Technology MCP6549-E/P linear comparators applications.
- RC Timers
- Simple Analog-to-Digital Converters (ADCs)
- Laptop Computers
- Automatic Test Equipment
- General-Purpose Portable Devices
- Set Top Boxes
- Wide Range VCO; MOS Clock Timers
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Analog front end
