MCP6549-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | MCP6549 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 3.3mm |
| Length | 19.05mm |
| Width | 6.35mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
MCP6549-I/P Overview
The product is packaged in 14-DIP (0.300, 7.62mm) for ease of transportation.This comparator is of the CMOS, Open-Drain, Rail-to-Rail, TTL output type.This chip is designed with the Tube package.There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .This is a 4 element comparator.The device contains 8 pins.Electronic comparator is recommended that the mounting type be Through Hole .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.14 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MCP6549 .In this comparator, the quiescent current is 1μA .There is a Through Hole for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 1μA .If the current supply exceeds 1μA , the comparator could malfunction.For normal operation, the operating supply voltage must be 5V .
MCP6549-I/P Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6549-I/P Applications
There are a lot of Microchip Technology MCP6549-I/P linear comparators applications.
- Analog front end
- Portable and Battery-Powered Systems
- Zero-Crossing Detectors
- Motor drives
- Battery-Powered Electronics
- Consumer Medical Electronics
- Notebooks and PDAs
- Power management
- Window Comparators, Multivibrators
- Mobile Communications
