MCP6549-I/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6549 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 1.6/5.5V |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4 μs |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 95.3 °C/W |
| Height | 1.25mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6549-I/SL Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type CMOS, Open-Drain, Rail-to-Rail, TTL is used for this comparator.This chip is designed with the Tube package.The device is designed with 14 terminations.The electrical component in this case belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .In total, it contains 4 elements.The pinout of the component starts from 14 pins it has.The type of mounting recommended is Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator consists of 14 pins.Alternatively, you may search for MCP6549 to find more pin-to-pin solutions for your specific needs.The comparator displays a quiescent current of 1μA .The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 1μA .If the current supply exceeds 1μA , the comparator could malfunction.The device can be operated with 1.6/5.5V power supplies.
MCP6549-I/SL Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6549-I/SL Applications
There are a lot of Microchip Technology MCP6549-I/SL linear comparators applications.
- General Purpose Low Voltage Applications
- Metering Systems
- Analog front end
- Simple Analog-to-Digital Converters (ADCs)
- Wide Range VCO; MOS Clock Timers
- Mobile Communications
- Automatic Test Equipment
- Set Top Boxes
- Current and voltage sensing
- Automotive
