MCP6549-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Current Rating | 600mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6549 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP6549-I/ST Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .Output type CMOS, Open-Drain, Rail-to-Rail, TTL is used for this comparator.Electronic comparator is shipped by Tube .14 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as General Purpose .The device contains 14 pins.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.14 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MCP6549 .There is a quiescent current of 1μA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.The nominal supply current of the device should be 1μA for normal use.A supply current exceeding 1μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum current of 1pA into the device.The normal operation of the system requires 5V operating voltage.
MCP6549-I/ST Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6549-I/ST Applications
There are a lot of Microchip Technology MCP6549-I/ST linear comparators applications.
- Battery-Powered Electronics
- RC Timers
- Self-diagnostics
- Industrial
- System control and monitoring
- Notebooks and PDAs
- Power management
- Wide Range VCO; MOS Clock Timers
- Window Comparators
- Mobile Phones
