Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP6549 |
Pin Count |
14 |
Output Type |
CMOS, Open-Drain, Rail-to-Rail, TTL |
Number of Elements |
4 |
Power Supplies |
1.6/5.5V |
Nominal Supply Current |
1μA |
Output Current |
30mA |
Max Supply Current |
1μA |
Propagation Delay |
8 μs |
Quiescent Current |
1μA |
Response Time |
3000 ns |
Common Mode Rejection Ratio |
70 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Output Current per Channel |
2mA |
Input Offset Voltage (Vos) |
7mV |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
7V |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Voltage - Input Offset (Max) |
7mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
6.5mV |
CMRR, PSRR (Typ) |
70dB CMRR, 80dB PSRR |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MCP6549T-I/SL Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Open-Drain, Rail-to-Rail, TTL output type.The chip is packaged with Tape & Reel (TR) .You can find 14 terminals of the comparator.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .Currently, it consists of only 4 elements.The board includes 14 pins.The recommended mounting method is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 14 pins.Search MCP6549 to find more pin-to-pin solutions.There is a quiescent current of 1μA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 1μA .A current supply greater than 1μA may cause the comparator to malfunction.The device can be powered by 1.6/5.5V power supplies.Input current to the device cannot exceed 1pA .
MCP6549T-I/SL Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6549T-I/SL Applications
There are a lot of Microchip Technology MCP6549T-I/SL linear comparators applications.
- Security Detection Systems
- High-Speed Differential Line Receiver
- Alarm and Monitoring Circuits
- System control and monitoring
- DC/DC and AC/DC power supplies
- Wireless Base Stations
- Power management
- Notebooks and PDAs
- Analog front end
- Current and voltage sensing