MCP6549T-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6549 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 1.6/5.5V |
| Nominal Supply Current | 1μA |
| Output Current | 30mA |
| Max Supply Current | 1μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 1μA |
| Response Time | 3000 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 2mA |
| Input Offset Voltage (Vos) | 7mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 7mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 6.5mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Natural Thermal Resistance | 100 °C/W |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6549T-I/ST Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of CMOS, Open-Drain, Rail-to-Rail, TTL is being used.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 14 terminals.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 4 elements.The device contains 14 pins.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.There are 14 pins on the comparator.Search MCP6549 to find more pin-to-pin solutions.The comparator displays a quiescent current of 1μA .This component has a Surface Mount mount for mounting to PCBs or other boards.For normal use of the device, the nominal supply current should be 1μA .The compartator could be damaged if the current supply exceeds 1μA .In order to operate the device, 1.6/5.5V power supplies are sufficient.A maximum current of 1pA can be supplied to the device.
MCP6549T-I/ST Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1μA
MCP6549T-I/ST Applications
There are a lot of Microchip Technology MCP6549T-I/ST linear comparators applications.
- Hand-Held Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Portable Battery Monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Building automation
- Appliances
- Current and voltage sensing
- Industrial
- Automatic Test Equipment
- Mobile Phones
