MCP6561RT-E/OT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6561R |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 130μA |
| Output Current | 50mA |
| Max Supply Current | 130μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Turn On Delay Time | 56 ns |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MCP6561RT-E/OT Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.The comparator has a type CMOS, Push-Pull, Rail-to-Rail, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .You can find 5 terminals of the comparator.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 1.8V voltage.In general, the chip type can be classified as General Purpose .This element consists of 1 elements in total.The device contains 5 pins.The recommended mounting type is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .5 pins are available on the comparator.Search MCP6561R to find more pin-to-pin solutions.The comparator presents a quiescent current of 130μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 130μA .If the current supply exceeds 130μA , the comparator might be damaged.A maximum current of 1pA can be supplied to the device.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
MCP6561RT-E/OT Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6561RT-E/OT Applications
There are a lot of Microchip Technology MCP6561RT-E/OT linear comparators applications.
- Portable and Battery-Powered Systems
- General Purpose Low Voltage Applications
- Wireless Base Stations
- Simple Analog-to-Digital Converters (ADCs)
- Multivibrators and High-Voltage Digital Logic Gates
- Consumer Medical Electronics
- Point of load regulators
- Body Control Modules
- Laptop Computers
- Set Top Boxes
