MCP6561T-E/LT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6561 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 130μA |
| Output Current | 50mA |
| Max Supply Current | 130μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Turn On Delay Time | 45 ns |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Natural Thermal Resistance | 256 °C/W |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6561T-E/LT Overview
A convenient packaging is provided in the form of 5-TSSOP, SC-70-5, SOT-353 .Output type CMOS, Push-Pull, Rail-to-Rail, TTL is used for this comparator.The part will be shipped by Tape & Reel (TR) .There are 5 terminals on the comparator.Electronic comparator is a component of the Comparator family.When supplied with 1.8V voltage, the comparator is capable of performing a wide range of tasks.Speaking of types, this is a typical General Purpose comparator.The total number of elements is 1 .Electronic comparator has 5 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.There are 5 pins on the comparator.Search MCP6561 to find more pin-to-pin solutions.This comparator presents a quiescent current of 130μA .A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 130μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 130μA .The maximal current your can input into the device is 1pA .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
MCP6561T-E/LT Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6561T-E/LT Applications
There are a lot of Microchip Technology MCP6561T-E/LT linear comparators applications.
- Power management
- Handheld Instruments
- Infotainment & cluster
- Portable and Battery-Powered Systems
- Lithium ion battery monitoring
- Zero-Crossing Detectors
- DC/DC and AC/DC power supplies
- Body Control Modules
- Automotive
- Zero-Crossing Detectors
