Parameters |
Power Supply Rejection Ratio (PSRR) |
70dB |
Max Input Current |
1pA |
Input Bias Current |
1pA |
Voltage - Input Offset (Max) |
10mV @ 5.5V |
Current - Input Bias (Max) |
1pA @ 5.5V |
Hysteresis |
5mV |
CMRR, PSRR (Typ) |
66dB CMRR, 70dB PSRR |
Natural Thermal Resistance |
256 °C/W |
Height |
1.3mm |
Length |
3.1mm |
Width |
1.8mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.8V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MCP6561 |
Pin Count |
5 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
1 |
Nominal Supply Current |
130μA |
Output Current |
50mA |
Max Supply Current |
130μA |
Propagation Delay |
80 ns |
Quiescent Current |
130μA |
Turn On Delay Time |
49 ns |
Response Time |
56 ns |
Common Mode Rejection Ratio |
66 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Output Current per Channel |
25mA |
Input Offset Voltage (Vos) |
10mV |
MCP6561T-E/OT Overview
The product is packaged in SC-74A, SOT-753 for ease of transportation.Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail, TTL .This chip is designed with the Tape & Reel (TR) package.As you can see, the comparator has5 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 1.8V voltage.Speaking of types, this is a typical General Purpose comparator.This is a 1 element comparator.The board includes 5 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .There are 5 pins on the comparator.You can search MCP6561 if you are looking for more pin-to-pin solutions.In this comparator, the quiescent current is 130μA .The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 130μA when using the device.If the current supply exceeds 130μA , the comparator could malfunction.Electronic comparator is possible to input a maximum current of 1pA into the device.Comparator electronics is acceptable to pack the device by TR .
MCP6561T-E/OT Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6561T-E/OT Applications
There are a lot of Microchip Technology MCP6561T-E/OT linear comparators applications.
- Automotive
- Wide Range VCO; MOS Clock Timers
- Point of load regulators
- Limit Comparators
- Window Comparators, Multivibrators
- Set Top Boxes
- Automatic Test Equipment
- Window Comparators
- Notebooks and PDAs
- Laptop Computers