MCP6561UT-E/OT
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6561U |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Natural Thermal Resistance | 256 °C/W |
| Height | 1.3mm |
| Length | 3.1mm |
| Width | 1.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
MCP6561UT-E/OT Overview
A convenient transport package is provided in SC-74A, SOT-753 .There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.We ship the part through Tape & Reel (TR) .There are5 terminals on the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 1.8V .When it comes to types, this comparator is a typical General Purpose .Electronic comparator consists of 1 elements in total.As a result, it contains 5 pins.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.This comparator has 5 pins.In order to find a solution that meets your specific needs, search MCP6561U for more pin-to-pin solutions.There is 130μA current flowing in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.You can input a maximum current of 1pA into this device.For normal operation, there should be 5V operating supply voltage applied.Packed in TR , this device is for general uses (often in ADC circuits).
MCP6561UT-E/OT Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6561UT-E/OT Applications
There are a lot of Microchip Technology MCP6561UT-E/OT linear comparators applications.
- Battery-Powered Electronics
- Consumer Medical Electronics
- Body Control Modules
- Point of load regulators
- Multivibrators and High-Voltage Digital Logic Gates
- Industrial
- Analog front end
- Lithium ion battery monitoring
- Appliances
- Automotive
